you can click on each question to go to the full original article:
Question asked by: Adrian Morgan.
Last update:
⭐⭐⭐⭐ 4.2/5 - 73 votes in 7 replies
Best reply:
- For security torx screws you will need to insert the flat head in against one of the outer grooves and the center nub of the head. ... - Security torx screws will usually turn the opposite direction, so you should turn clockwise to remove them.
Fit the end of the Torx screwdriver into the end of the Torx screw. Turn the handle of the screwdriver counterclockwise to loosen the screw. If the screw does not loosen or the tip of the screwdriver turns inside of the recess without turning the screw, proceed to Step 4.
Torx screws can be easy to damage so be very careful when using an alternative tool to unscrew these screws. Use a small flat head screwdriver. Insert the flat head screwdriver between two opposite edges of the screw head. Turn counterclockwise to remove the screw.
Use a small flat head screwdriver. Insert the flat head screwdriver between two opposite edges of the screw head. Turn counterclockwise to remove the screw.
⭐⭐⭐⭐⭐ 4.2/5 (41 Votes)
- Use a plastic toothbrush. Similar to its use on both Phillips and flat head screws, a plastic toothbrush can also be used to remove a Torx screw. … - Use a small flat head screwdriver. … - Break out the pin for security Torx screws.
You can also grip the screw with a pair of pliers and try unscrewing it that way. If it's a tiny screw, use the tip of a knife or a pair of tweezers to unscrew it. To unscrew a Torx screw without a screwdriver, lightly melt the end of a plastic toothbrush and press it into the top of the screw.
Use a small flat head screwdriver. Insert the flat head screwdriver between two opposite edges of the screw head. Turn counterclockwise to remove the screw.
To unscrew a screw without a screwdriver, use a butter knife, coin, credit card, or the tab from a soda can to twist the screw counterclockwise. You can also grip the screw with a pair of pliers and try unscrewing it that way. If it's a tiny screw, use the tip of a knife or a pair of tweezers to unscrew it.
We will respond to your email totally Free!:
People who have found this answer useful: